分享好友 系统运维首页 频道列表

linux下安装redis3.2

Linux系统  2023-02-10 03:070
下载地址:http://www.redis.io/download
选取当前最新版本3.2.1下载,上传到linux上,进行解压缩:
[root@mongodb1 redis]# ls
redis-3.2.1 redis-3.2.1.tar.gz
进入redis-3.2.1目录下,运行make进行安装编译:
[root@mongodb1 redis-3.2.1]# ls
00-RELEASENOTES BUGS CONTRIBUTING COPYING deps INSTALL Makefile MANIFESTO README.md redis.conf runtest runtest-cluster runtest-sentinel sentinel.conf src tests utils
make需要安装编译器,默认为gcc.
[root@mongodb1 redis-3.2.1]# make
cd src && make all
make[1]: Entering directory `/root/redis/redis-3.2.1/src'
CC adlist.o
CC quicklist.o
CC ae.o
In file included from ae.c:53:
ae_epoll.c: In function 'aeApiAddEvent':
ae_epoll.c:75: warning: missing initializer
ae_epoll.c:75: warning: (near initialization for 'ee.data')
ae_epoll.c: In function 'aeApiDelEvent':
ae_epoll.c:92: warning: missing initializer
ae_epoll.c:92: warning: (near initialization for 'ee.data')
CC anet.o
anet.c: In function 'anetSockName':
anet.c:640: warning: dereferencing pointer 's' does break strict-aliasing rules
anet.c:638: note: initialized from here
anet.c:644: warning: dereferencing pointer 's' does break strict-aliasing rules
anet.c:642: note: initialized from here
anet.c: In function 'anetPeerToString':
anet.c:584: warning: dereferencing pointer 's' does break strict-aliasing rules
anet.c:582: note: initialized from here
anet.c:588: warning: dereferencing pointer 's' does break strict-aliasing rules
anet.c:586: note: initialized from here
anet.c: In function 'anetTcpAccept':
anet.c:555: warning: dereferencing pointer 's' does break strict-aliasing rules
anet.c:553: note: initialized from here
anet.c:559: warning: dereferencing pointer 's' does break strict-aliasing rules
anet.c:557: note: initialized from here
CC dict.o
CC server.o
CC sds.o
CC zmalloc.o
CC lzf_c.o
CC lzf_d.o
CC pqsort.o
CC zipmap.o
CC sha1.o
CC ziplist.o
CC release.o
CC networking.o
CC util.o
CC object.o
CC db.o
CC replication.o
CC rdb.o
CC t_string.o
CC t_list.o
CC t_set.o
CC t_zset.o
CC t_hash.o
CC config.o
CC aof.o
CC pubsub.o
CC multi.o
CC debug.o
CC sort.o
CC intset.o
CC syncio.o
CC cluster.o
CC crc16.o
CC endianconv.o
CC slowlog.o
CC scripting.o
CC bio.o
CC rio.o
CC rand.o
CC memtest.o
CC crc64.o
CC bitops.o
CC sentinel.o
CC notify.o
CC setproctitle.o
CC blocked.o
CC hyperloglog.o
CC latency.o
CC sparkline.o
CC redis-check-rdb.o
CC geo.o
LINK redis-server
INSTALL redis-sentinel
CC redis-cli.o
LINK redis-cli
CC redis-benchmark.o
LINK redis-benchmark
INSTALL redis-check-rdb
CC redis-check-aof.o
LINK redis-check-aof
 
Hint: It's a good idea to run 'make test' ;)
 
make[1]: Leaving directory `/root/redis/redis-3.2.1/src'
make完成之后,进行install,默认安装路径为/usr/local/bin下,这里我们把他安装目录放到/usr/local/redis下,使用PREFIX指定目录:
[root@mongodb1 redis-3.2.1]# mkdir /usr/local/redis
[root@mongodb1 redis-3.2.1]# make PREFIX=/usr/local/redis install
cd src && make install
make[1]: Entering directory `/root/redis/redis-3.2.1/src'
 
Hint: It's a good idea to run 'make test' ;)
 
INSTALL install
INSTALL install
INSTALL install
INSTALL install
INSTALL install
make[1]: Leaving directory `/root/redis/redis-3.2.1/src'
将redis可执行目录添加到环境变量中,编辑~/.bash_profile添加redis环境变量:
[root@mongodb1 bin]# cat ~/.bash_profile
# .bash_profile
 
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
 
# User specific environment and startup programs
 
PATH=/usr/local/redis/bin:/usr/local/mongodb/bin:$PATH:$HOME/bin

3.创建redis服务

此时其实就可以启动redis服务了,例如:
% ./redis-server --port 9999 --slaveof 127.0.0.1 6379
% ./redis-server /etc/redis/6379.conf --loglevel debug
但是我们一般还是把redis做成服务来启动,进入到utils目录,然后运行install_server.sh,运行这个会询问你几个问题,包括
指定redis的端口号
指定redis的配置文件
指定redis的日志文件
指定redis的数据目录文件
指定redis的可执行目录文件.
[root@mongodb1 utils]# ./install_server.sh
Welcome to the redis service installer
This script will help you easily set up a running redis server
 
Please select the redis port for this instance: [6379]
Selecting default: 6379
Please select the redis config file name [/etc/redis/6379.conf]
Selected default - /etc/redis/6379.conf
Please select the redis log file name [/var/log/redis_6379.log] /data/redis/log/redis_6378.log
Please select the data directory for this instance [/var/lib/redis/6379] /data/redis/6379
Please select the redis executable path [/usr/local/redis/bin/redis-server]
Selected config:
Port : 6379
Config file : /etc/redis/6379.conf
Log file : /data/redis/log/redis_6378.log
Data dir : /data/redis/6379
Executable : /usr/local/redis/bin/redis-server
Cli Executable : /usr/local/redis/bin/redis-cli
Is this ok? Then press ENTER to go on or Ctrl-C to abort.
Copied /tmp/6379.conf => /etc/init.d/redis_6379
Installing service...
Successfully added to chkconfig!
Successfully added to runlevels 345!
Starting Redis server...
Installation successful!
完成之后,redis的服务就添加完毕了,服务名为redis_6379:
[root@mongodb1 init.d]# ls -l re*
-rwxr-xr-x 1 root root 1714 Jul 1 11:13 redis_6379
-rwxr-xr-x. 1 root root 1822 Jan 16 2013 restorecond
启动和关闭redis服务:
[root@mongodb1 init.d]# service redis_6379 status
Redis is running (19280)
[root@mongodb1 init.d]# service redis_6379 stop
Stopping ...
Redis stopped
[root@mongodb1 init.d]# service redis_6379 start
Starting Redis server...
使用redis-cli连接redis:
[root@mongodb1 init.d]# redis-cli
127.0.0.1:6379>

4.redis服务解析

其实做完以上几步,我们已经可以正常使用redis了,下面我们来解析一下redis的启动停止过程.我们解析/etc/init.d/redis_6379文件:
#!/bin/sh
#Configurations injected by install_server below....
 
EXEC=/usr/local/redis/bin/redis-server
CLIEXEC=/usr/local/redis/bin/redis-cli
PIDFILE=/var/run/redis_6379.pid
CONF="/etc/redis/6379.conf"
REDISPORT="6379"
###############
# SysV Init Information
# chkconfig: - 58 74
# description: redis_6379 is the redis daemon.
### BEGIN INIT INFO
# Provides: redis_6379
# Required-Start: $network $local_fs $remote_fs
# Required-Stop: $network $local_fs $remote_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Should-Start: $syslog $named
# Should-Stop: $syslog $named
# Short-Description: start and stop redis_6379
# Description: Redis daemon
### END INIT INFO
 
 
case "$1" in
start)
if [ -f $PIDFILE ]
then
echo "$PIDFILE exists, process is already running or crashed"
else
echo "Starting Redis server..."
$EXEC $CONF
fi
;;
stop)
if [ ! -f $PIDFILE ]
then
echo "$PIDFILE does not exist, process is not running"
else
PID=$(cat $PIDFILE)
echo "Stopping ..."
$CLIEXEC -p $REDISPORT shutdown
while [ -x /proc/${PID} ]
do
echo "Waiting for Redis to shutdown ..."
sleep 1
done
echo "Redis stopped"
fi
;;
status)
PID=$(cat $PIDFILE)
if [ ! -x /proc/${PID} ]
then
echo 'Redis is not running'
else
echo "Redis is running ($PID)"
fi
;;
restart)
$0 stop
$0 start
;;
*)
echo "Please use start, stop, restart or status as first argument"
;;
esac
可以发现,其实启动redis的语法就是:
/usr/local/redis/bin/redis-server /etc/redis/6379.conf
关闭redis的语法就是:
/usr/local/redis/bin/redis-server -p 6379 shutdown
检查redis是否运行,就是检查redis的pid文件下的进程是否存在.
查看redis的配置文件/etc/redis/6379.conf,里面有很多注释,去除注释:
[root@mongodb1 utils]# grep -E -v "^#" /etc/redis/6379.conf |sed '/^$/d'
bind 127.0.0.1
protected-mode yes
port 6379
tcp-backlog 511
timeout 0
tcp-keepalive 300
daemonize yes
supervised no
pidfile /var/run/redis_6379.pid
loglevel notice
logfile /data/redis/log/redis_6379.log
databases 16
save 900 1
save 300 10
save 60 10000
stop-writes-on-bgsave-error yes
rdbcompression yes
rdbchecksum yes
dbfilename dump.rdb
dir /data/redis/6379
slave-serve-stale-data yes
slave-read-only yes
repl-diskless-sync no
repl-diskless-sync-delay 5
repl-disable-tcp-nodelay no
slave-priority 100
appendonly no
appendfilename "appendonly.aof"
appendfsync everysec
no-appendfsync-on-rewrite no
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb
aof-load-truncated yes
lua-time-limit 5000
slowlog-log-slower-than 10000
slowlog-max-len 128
latency-monitor-threshold 0
notify-keyspace-events ""
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
list-max-ziplist-size -2
list-compress-depth 0
set-max-intset-entries 512
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
hll-sparse-max-bytes 3000
activerehashing yes
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit slave 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
hz 10
aof-rewrite-incremental-fsync yes
其中主要的参数:
bind:绑定的ip地址
port:监听端口号
pidfile:pid文件名
dir:数据文件目录
logfile:日志文件地址
 
 最后我分享一下我遇到的坑:
第一:我发现别的服务器不可以访问redis  
开始以为是iptables  然后各种设置不中 
 
程序连接 connection timetout 本地telnet也不通  原因是 etc/redis/6379.conf  里面bind 127.0.0.1  把所有的bind去掉 这样就可以任意访问了 不用设置具体的ip。
 
第二:第一步设置完之后 用程序连接发现报如下错误:
redis.clients.jedis.exceptions.JedisDataException: DENIED Redis is running in protected mode because protected mode is enabled, no bind address was specified, no authentication password is requested to clients. In this mode connections are only
 
 accepted from the loopback interface. If you want to connect from external computers to Redis you may adopt one of the following solutions: 1) Just disable protected mode sending the command 'CONFIG SET protected-mode no' from the loopback interface by connecting to Redis from the same host the server is running, however MAKE SURE Redis is not publicly accessible from internet if you do so. Use CONFIG REWRITE to make this change permanent. 2) Alternatively you can just disable the protected mode by editing the Redis configuration file, and setting the protected mode option to 'no', and then restarting the server. 3) If you started the server manually just for testing, restart it with the '--protected-mode no' option. 4) Setup a bind address or an authentication password. NOTE: You only need to do one of the above things in order for the server to start accepting connections from the outside.
at redis.clients.jedis.Protoc
大致意思是开启了保护模式  访问只能通过backloop地址访问
 解决办法依旧是修改7379_conf  把protected-mode 修改为no          然后              daemonize no设置为yes 注册为服务在后台跑  
 
重新启动redis就ok

查看更多关于【Linux系统】的文章

展开全文
相关推荐
反对 0
举报 0
评论 0
图文资讯
热门推荐
优选好物
更多热点专题
更多推荐文章
linux下如何单独编译设备树? linux设备树是什么
答: make vendor/device_name.dtb  如: make freescale/fsl-1043a-rdb.dtb

0评论2023-02-10369

移植linux3.7到nuc900系列开发板遇到的问题
通过移植学习linux新版本内核,大概了解一下内核变化。记录一下移植过程中遇到的问题或值得注意的地方。1,添加一款arm9芯片的支持首先修改\arch\arm\tools\mach-types文件添加一行w90p950evbMACH_W90P950EVBW90P950EVB同目录下的脚本文件在编译内核时会根据

0评论2023-02-10697

终于解决了Linux下运行OCCI程序一直报Error while trying to retrieve text for error ORA-01804错误
终于解决了Linux下运行OCCI程序一直报Error while trying to retrieve text for error ORA-01804错误http://blog.csdn.net/zklth/article/details/7184032Linux下 和 Windows 下 Oracle Instant Client 的安装.http://fableking.iteye.com/blog/2115724 http

0评论2023-02-10637

linux lvm删除导致无法启动
要想编辑/etc/fstab文件,我们需要在系统中重新挂载根目录,使其具有可读写状态,使用如下命令:mount -o remount,rw /该条命令的作用是,以可读写的形式重新挂载根分区。然后再编辑/etc/fstab文件,就可以正常编辑。如下:

0评论2023-02-10931

linux中的strip命令简介------给文件脱衣服【转】
转自:http://blog.csdn.net/stpeace/article/details/47090255版权声明:本文为博主原创文章,转载时请务必注明本文地址, 禁止用于任何商业用途, 否则会用法律维权。作为一名Linux开发人员, 如果没有听说过strip命令, 那是很不应该的。 strip这个单词,

0评论2023-02-10728

linux下常用文件系统 linux支持的文件系统
不同的操作系统需要使用不同类型的文件系统,为了与其他操作系统兼容,以相互交换数据,通常操作系统都能支持多种类型的文件系统。Linux内核支持十多种不同类型的文件系统,下面对Linux常用的文件系统作一个简单介绍。ext2与ext3文件系统ext是第一个专门为Lin

0评论2023-02-10794

linux下将Python环境默认更改为Python3.6
步骤:#删除原来指向python2的软链接sudo mv /usr/bin/python /usr/bin/python.bak #/usr/local/python3.6/bin/python3.6 这个路径为实际的python3.6的bin文件夹下的Python3.6的路径,这个按照自己的实际情况进行更改 sudo ln -s /usr/bin/python3.6 /usr/bin

0评论2023-02-10852

Linux更改SSH默认端口 linux设置ssh端口
1.修改ssh配置文件  vim /etc/ssh/sshd_config  将 #Port 22 改为 Port 10023(更改的端口号最好在1024~65535间,不和其他服务端口冲突就ok)2.关闭防火墙  systemctl stop firewalld.service3.重启ssh服务  systemctl restart sshd.service4.新建ssh

0评论2023-02-10765

mongodb 对内存的占用监控 ——mongostat,linux系统可用的内存是free + buffers + cached
刚开始使用mongodb的时候,不太注意mongodb的内存使用,但通过查资料发现mongodb对内存的占用是巨大的,在本地测试服务器中,8G的内存居然被占用了45%。汗呀。 本文就来剖析一下mongodb对内存的具体使用方法,以及生产环境针对mongodb占大量内存的问题的解决

0评论2023-02-10641

linux grep命令参数及用法详解---linux管道命令grep
功能说明:查找文件里符合条件的字符串。语  法:grep [-abcEFGhHilLnqrsvVwxy][-A显示列数][-B显示列数][-C显示列数][-d进行动作][-e范本样式][-f范本文件][--help][范本样式][文件或目录...]补充说明:grep 指令用于查找内容包含指定的范本样式的文件,

0评论2023-02-10315

更多推荐